What Are the Complete Sets of Tools an HVAC Engineer or Technician Should Have?

Your HVAC system is responsible for maintaining the desired temperature within an enclosed area. Those enclosed areas include automobiles, residences, commercial buildings, ships, etc. So, all HVAC technicians must have solid knowledge regarding HVAC tools operating properly.

Only with the help of intuitive HVAC tools can professionals successfully install and maintain all types of HVAC systems. In some places, employers need to provide expensive tool sets. These can include cordless drill, reciprocating saw, refrigerant scales, leak detectors, etc.

Overall, technicians will have to invest in some basic HVAC tools, as well as some other useful items. Almost all employers need to provide reimbursements if any tools used by their technicians get broken while working. Thus, it’s important for technicians to know what the best HVAC tools are that they must carry with them.

List of HVAC Technician Tools

Basic Hand Tools

1. Pipe Wrenches

It is a traditional heavy metal pipe wrench, and presumably better if you get the type of wrenches that have aluminium handles. In fact, you must carry a 14’’ and an 8’ pipe wrench.

2. Long Neck Nut Driver

Most technicians will carry a set of long-neck nut drivers. This can be quite helpful when they need to enter into tight areas while working. It will be helpful to have these tools in different shapes.

3. Utility Knife

The utility knife tool will be really useful to cut many things. These include everything from insulation to open boxes of parts. Also, you can carry some extra blades that are applicable with this tool.

4. 11-in-one screwdriver

You must have this 11-in-one tool rather than multiple screwdrivers and some other tools. You can have one with an insulated handle to offer a safer option for you when you need to work with electronics.

5. Service Wrench

The service wrench is another vital tool that can help you open and close refrigerator valves on compression. These can even open and close setting tanks for torching.

6. Sheet Metal shears

Cutting holes in metal ductwork is often required. In this task, red and green sheet metal shears can be quite useful. These tools can make several cuts in various directions. To work properly, you will need 12” ling shears with a 3” bite.

7. Inspection mirror

Many HVAC technicians need to inspect welding joints on a pipe’s back or read numbers. All these are not so easy to see. Therefore, you will need this handy tool. This tool usually has an inspection mirror behind what you must see. You just need to carefully tilt this mirror and see what you need to see.

8. Pipe and Tube Cutters

HVAC technicians will need to cut different types of pipes while working. Those include PVC and copper pipes and tubes. Thus, you will need a small cutter that can cut pipes with less than 1 ¼ inches diameter, and a larger cutter for pipes of over 1 ¾ inches.

9. Adjustable wrenches

It’s helpful for technicians if you have multiple adjustable wrenches of 6” and 8”.

10. Pipe caliper

This is another must-have tool in the HVAC tools list. The pipe caliper can help you measure the sizes of pipes.

11. Channel Locks

You must carry a set of 8”, 10”, and also 12” inch channel locks to work properly.

12. Tech screwdriver

Your must have HVAC tools list must include a small screwdriver with a narrow head. It can help you easily take the covers off thermostats.

13. Fuse puller

Safety is always important in any kind of task. Hence, you will need this tool to help you easily pull a fuse from its holder.

14. Level

When you need to install a thermostat or any other equipment, this tool can help you a lot. With this level tool, you can easily ensure the proper leveling of the surface. Also, a magnetic version of this tool will be perfect for different scenarios.

15. Hammer

It is another must have element that you should have in your HVAC tool kit. Carrying a lightweight hammer will make the hard work easy.

Specialty Tools for HVAC Technicians

Multimeter

This is a voltage tester that helps in troubleshooting various types of electronic components. It is important to have a version that is created mainly for HVAC technicians. On the meter, you will see a temperature bulb symbol. It will even include a thermocouple, and amp probes that help in reading amps on a motor.

Valve core removal tool

This tool can help in the task of evacuation and recovery of refrigerant. You may need to do this task in the procedure of installing and replacing vital equipment. Removing the valve core can allow unrestricted flow to speed up the entire procedure. Also, you need to get one that is rated for pressure and vacuum conditions.

Digital probes

When you need to properly diagnose any issues regarding refrigeration and air conditioning, then just get a set of digital probes. This will give you accurate and fast low-side and high-side readings.

Filter Puller

The filter puller has a telescoping handle and hook. This allows you to easily grab the filter and pull it towards you.

HVAC tool bag

To keep organized, you must have a sturdy HVAC tool bag to carry all your important tools. This bag must have several pockets where you can store all your important tools to work properly.

Gloves

Most technicians need to work with several types of dangerous chemicals. So, to protect your hands, you will need a set of gloves.

Safety glasses

Safety glasses are important to carry to protect your eyes from chemicals, debris, or some other flying elements.

Rechargeable flashlight

You must not forget to carry a rechargeable flashlight. You can use this tool for several years without the need to buy batteries.

Tape measure with magnetic tip

You must carry a tape measure with a magnetic tip. The size of this tool has to be 25 feet.

Black Markers

This tool will help you when you need to record your maintenance tasks on a certain log.

Who To Trust?

When you need to use the fastest and easiest residential HVAC systems, you should trust EDS.tech. We provide highly useful software and HVAC tool sets that will surely help you to a great extent.

Conclusion

Now you know why a complete HVAC tool kit is a must-have for all HVAC technicians. If you need some high-quality and efficient HVAC tools, check out our tool suite at www.EDS.tech and offer your team exceptional success today!